- MULTI-CUTOUT - Contains 3 standard cutout solutions for 3 specific sized apertures or offsets.
-
FLEXI-CUTOUT - Allows you to create a custom sized cutout for larger overflow boxes, pipes & lights.
- Brace Bar Set - For larger aquariums or whenever fitting a cutout set we recommend installation of one or more brace bars to retain the structural integrity of the frame and to stop the outer edges from pulling in together.
Multi-cutout Set - TCMULTICO
Each Jumpguard Multi-cutout Set provides you with 3 different cutout options to allow you to modify the frame around any light brackets, cables or pipework etc.
Each kit contains
- 1 pair of 15mm offset corners
- 1 pair of 40mm offset corners
- 1 x 40mm x 120mm lighting bracket or rigid cut-out
Note:
Cutting into the standard square frame, especially on larger frames, will generally reduce the rigidity and we would recommend installing one of one or more cross braces, as required, to retain the structural integrity.
Flexi-cutout Set - TCFLEXICO
The Jumpguard Flexi-cutout Set provides you with 2 standard corners and 2 reverse corners to allow you to modify the frame around any larger overflow boxes, light brackets, cables or pipework etc, that would not be covered by the Multi-Cutout Set.
Each kit contains
- 1 pair of standard corners
- 1 pair of reverse corners
Note:
Cutting into the standard square frame, especially on larger frames, will generally reduce the rigidity and we would recommend installing one of one or more cross braces, as required, to retain the structural integrity
Brace Bar Set - TCBRACE
For larger aquariums or whenever fitting a cutout set we recommend installation of one or more brace bars to retain the structural integrity of the frame and to stop the outer edges from pulling in together..
Each kit contains...
- 2 x 900mm x 12mm x 8mm brace bars
- 2 x T piece connectors
- 6 x connector clips1 pair of standard corners